Yunneng Kiln

Chinese 中文
English  英文

Free delivery samples

high quality assurance

Engineer's door-to-door guidance

lifelong technical support

Contact us+86159669653330086-533-5331887

Information Center

News

Refractory Fiber Data

Industry News

Technical knowledge

Castable Technology

Refractory Brick Technology

Home -> News -> News -> Refractory Fiber Data ->


Introduction and characteristics of aluminum silicate fiber castable

Words:[Big][Medium][Small] Mobile Page Two-Dimensional Code 2018-06-10     

Product description:

Aluminum silicate fiber castable production process is zibo yuneng kiln technology co., LTD. Aluminum silicate fiber cotton after crushing directly into a variety of amorphous refractory materials.According to the different refractoriness to choose different kinds of matrix materials and binder, will be broken aluminum silicate fiber added in these loose materials, after stirring, adding water (add water to reach 40% ~ 90% of its shrinkage) stirring molding.

Product features:

Aluminum silicate fiber castable/ceramic fiber castable not only has the high temperature resistance, high strength and low shrinkage rate of heavy refractory castable, but also has the low thermal conductivity and high thermal shock resistance of light insulation castable.The thermal conductivity of granular ceramic fiber castable at 500℃ is about 0.48 W/m·k.The appearance of high strength and light castable improves the insulation effect of overall castable of furnace wall, but most of the light heat insulation castable has low temperature and small strength.At present, alumina hollow ball refractory castable and mullite high strength light castable, although the compressive strength of drying at 110℃ reaches 12 ~ 18MPa, it is very little improved at high temperature, only at 25MPa, the thermal conductivity at 500℃ is still twice as high as that of ceramic fiber castable.



返回上一步
打印此页

Relevant Product Display


Relevant information